Inheritance Hierarchy:
System.Object
Autodesk.Revit.DB.Element
Autodesk.Revit.DB.HostObject
Autodesk.Revit.DB.MEPCurve
Autodesk.Revit.DB.Electrical.Wire
System.Object
Autodesk.Revit.DB.Element
Autodesk.Revit.DB.HostObject
Autodesk.Revit.DB.MEPCurve
Autodesk.Revit.DB.Electrical.Wire
Wire Class Members:
| Name | Description | Inherited From |
|---|---|---|
| AssemblyInstanceId | The id of the assembly instance to which the element belongs. (Inherited from Element ) | Element |
| BoundingBox | Retrieves a box that circumscribes all geometry of the element. (Inherited from Element ) | Element |
| Category | Retrieves a Category object that represents the category or sub category in which the element resides. (Inherited from Element ) | Element |
| ConnectorManager | The connector manager of this MEP curve. (Inherited from MEPCurve ) | MEPCurve |
| CreatedPhaseId | Id of a Phase at which the Element was created. (Inherited from Element ) | Element |
| DemolishedPhaseId | Id of a Phase at which the Element was demolished. (Inherited from Element ) | Element |
| DesignOption | Returns the design option to which the element belongs. (Inherited from Element ) | Element |
| Diameter | The diameter of the MEP curve. (Inherited from MEPCurve ) | MEPCurve |
| Document | Returns the Document in which the Element resides. (Inherited from Element ) | Element |
| Geometry | Retrieves the geometric representation of the element. (Inherited from Element ) | Element |
| GroundConductorNum | The ground conductor number. Its default value is zero after created. | |
| GroupId | The id of the group to which an element belongs. (Inherited from Element ) | Element |
| Height | The height of the MEP curve. (Inherited from MEPCurve ) | MEPCurve |
| HotConductorNum | The hot conductor number. Its default value is zero after created. | |
| Id | A unique identifier for an Element in an Autodesk Revit project. (Inherited from Element ) | Element |
| IsModifiable | Identifies if the element is modifiable. (Inherited from Element ) | Element |
| IsTransient | Indicates whether an element is transient or permanent. (Inherited from Element ) | Element |
| IsValidObject | Specifies whether the .NET object represents a valid Revit entity. (Inherited from Element ) | Element |
| LevelId | The id of the level associated with the element. (Inherited from Element ) | Element |
| LevelOffset | The offset of the MEP curve. (Inherited from MEPCurve ) | MEPCurve |
| Location | This property is used to find the physical location of an element within a project. (Inherited from Element ) | Element |
| MEPSystem | The system of the MEP curve. (Inherited from MEPCurve ) | MEPCurve |
| Name | A human readable name for the Element. (Inherited from Element ) | Element |
| NeutralConductorNum | The neutral conductor number. Its default value is zero after created. | |
| NumberOfVertices | The number of vertices of the wire, including the start and end point. | |
| OwnerViewId | The id of the view that owns the element. (Inherited from Element ) | Element |
| Parameter[BuiltInParameter] | Retrieves a parameter from the element given a parameter id. (Inherited from Element ) | Element |
| Parameter[Definition] | Retrieves a parameter from the element based on its definition. (Inherited from Element ) | Element |
| Parameter[Guid] | Retrieves a parameter from the element given a GUID for a shared parameter. (Inherited from Element ) | Element |
| Parameters | Retrieves a set containing all of the parameters that are contained within the element. (Inherited from Element ) | Element |
| ParametersMap | Retrieves a map containing all of the parameters that are contained within the element. (Inherited from Element ) | Element |
| Pinned | Identifies if the element has been pinned to prevent changes. (Inherited from Element ) | Element |
| ReferenceLevel | The reference level of the MEP curve. (Inherited from MEPCurve ) | MEPCurve |
| UniqueId | A stable unique identifier for an element within the document. (Inherited from Element ) | Element |
| VersionGuid | Get the element version Guid. (Inherited from Element ) | Element |
| ViewSpecific | Identifies if the element is owned by a view. (Inherited from Element ) | Element |
| Width | The width of the MEP curve. (Inherited from MEPCurve ) | MEPCurve |
| WiringType | The wiring type(arc or chamfer) for the wire. | |
| WorksetId | Get Id of the Workset which owns the element. (Inherited from Element ) | Element |
| Name | Description | Inherited From |
|---|---|---|
| AppendVertex | Appends one vertex to the end of the wire. | |
| ArePhasesModifiable | Returns true if the properties CreatedPhaseId and DemolishedPhaseId can be modified for this Element. (Inherited from Element ) | Element |
| AreVertexPointsValid | Checks if the given vertex points are valid for the wire. | |
| CanBeHidden | Indicates if the element can be hidden in the view. (Inherited from Element ) | Element |
| CanBeLocked | Identifies if the element can be locked. (Inherited from Element ) | Element |
| CanDeleteSubelement | Checks if given subelement can be removed from the element. (Inherited from Element ) | Element |
| CanHaveTypeAssigned() | Identifies if the element can have a type assigned. (Inherited from Element ) | Element |
| ChangeTypeId(ElementId) | Changes the type of the element. (Inherited from Element ) | Element |
| ConnectTo | Connects the wire to other elements. | |
| Create | Creates a new wire. | |
| DeleteEntity | Deletes the existing entity created by %schema% in the element (Inherited from Element ) | Element |
| DeleteSubelement | Removes a subelement from the element. (Inherited from Element ) | Element |
| DeleteSubelements | Removes the subelements from the element. (Inherited from Element ) | Element |
| Dispose | (Inherited from Element ) | Element |
| Equals | Determines whether the specified object is equal to the current object. (Inherited from Object ) | Object |
| EvaluateAllParameterValues | Evaluates all the parameters' values of the element. (Inherited from Element ) | Element |
| EvaluateParameterValues | Evaluate the parameters' values of the element on the given parameter ID set. (Inherited from Element ) | Element |
| FindInserts | Gets the ids of the instances inserted into this host object. (Inherited from HostObject ) | HostObject |
| GetDependentElements | Get all elements that, from a logical point of view, are the children of this Element. (Inherited from Element ) | Element |
| GetEntity | Returns the existing entity corresponding to the Schema if it has been saved in the Element, or an invalid entity otherwise. (Inherited from Element ) | Element |
| GetEntitySchemaGuids | Returns the Schema guids of any Entities stored in this element. (Inherited from Element ) | Element |
| GetExternalFileReference | Gets information pertaining to the external file referenced by the element. (Inherited from Element ) | Element |
| GetExternalResourceReference | Gets the ExternalResourceReference associated with a specified external resource type. (Inherited from Element ) | Element |
| GetExternalResourceReferenceExpanded | Gets the collection of ExternalResourceReference associated with a specified external resource type. (Inherited from Element ) | Element |
| GetExternalResourceReferences | Gets the map of the external resource references referenced by the element. (Inherited from Element ) | Element |
| GetExternalResourceReferencesExpanded | Gets the expanded map of the external resource references referenced by the element. (Inherited from Element ) | Element |
| GetGeneratingElementIds | Returns the ids of the element(s) that generated the input geometry object. (Inherited from Element ) | Element |
| GetGeometryObjectFromReference | Retrieve one geometric primitive contained in the element given a reference. (Inherited from Element ) | Element |
| GetHashCode | Serves as the default hash function. (Inherited from Object ) | Object |
| GetMaterialArea | Gets the area of the material with the given id. (Inherited from Element ) | Element |
| GetMaterialIds | Gets the element ids of all materials present in the element. (Inherited from Element ) | Element |
| GetMaterialVolume | Gets the volume of the material with the given id. (Inherited from Element ) | Element |
| GetMEPSystems | Gets the systems to which the wire belongs. | |
| GetMonitoredLinkElementIds | Provides the link instance IDs when the element is monitoring. (Inherited from Element ) | Element |
| GetMonitoredLocalElementIds | Provides the local element IDs when the element is monitoring. (Inherited from Element ) | Element |
| GetOrderedParameters | Gets the parameters associated to the element in order. (Inherited from Element ) | Element |
| GetParameter | Retrieves a parameter from the element given identifier. (Inherited from Element ) | Element |
| GetParameterFormatOptions | Returns a FormatOptions override for the element Parameter, or a default FormatOptions if no override exists. (Inherited from Element ) | Element |
| GetParameters | Retrieves the parameters from the element via the given name. (Inherited from Element ) | Element |
| GetPhaseStatus | Gets the status of a given element in the input phase (Inherited from Element ) | Element |
| GetSubelements | Returns the collection of element subelements. (Inherited from Element ) | Element |
| GetType | Gets the Type of the current instance. (Inherited from Object ) | Object |
| GetTypeId | Returns the identifier of this element's type. (Inherited from Element ) | Element |
| GetValidTypes() | Obtains a set of types that are valid for this element. (Inherited from Element ) | Element |
| GetVertex | Gets the position of an existing vertex. | |
| HasPhases | Returns true if this Element has the properties CreatedPhaseId and DemolishedPhaseId. (Inherited from Element ) | Element |
| InsertVertex | Inserts a new vertex before the specified index. | |
| IsCreatedPhaseOrderValid | Returns true if createdPhaseId and demolishedPhaseId are in order. (Inherited from Element ) | Element |
| IsDemolishedPhaseOrderValid | Returns true if createdPhaseId and demolishedPhaseId are in order. (Inherited from Element ) | Element |
| IsExternalFileReference | Determines whether this Element represents an external file. (Inherited from Element ) | Element |
| IsHidden | Identifies if the element has been permanently hidden in the view. (Inherited from Element ) | Element |
| IsMonitoringLinkElement | Indicate whether an element is monitoring any elements in any linked models. (Inherited from Element ) | Element |
| IsMonitoringLocalElement | Indicate whether an element is monitoring other local elements. (Inherited from Element ) | Element |
| IsPhaseCreatedValid | Returns true if createdPhaseId is an allowed value for the property CreatedPhaseId in this Element. (Inherited from Element ) | Element |
| IsPhaseDemolishedValid | Returns true if demolishedPhaseId is an allowed value for the property DemolishedPhaseId in this Element. (Inherited from Element ) | Element |
| IsValidType(ElementId) | Checks if given type is valid for this element. (Inherited from Element ) | Element |
| IsVertexPointValid | Checks if the given vertex point can be added to this wire. | |
| LookupParameter | Attempts to find a parameter on the element which has the given name. (Inherited from Element ) | Element |
| RefersToExternalResourceReference | Determines whether this Element uses external resources associated with a specified external resource type. (Inherited from Element ) | Element |
| RefersToExternalResourceReferences | Determines whether this Element uses external resources. (Inherited from Element ) | Element |
| RemoveVertex | Removes the vertex corresponding to the specified index. Can not remove the start or end vertex if it already connects to other element. | |
| SetEntity | Stores the entity in the element. If an Entity described by the same Schema already exists, it is overwritten. (Inherited from Element ) | Element |
| SetVertex | Sets the position of a given vertex. If the vertex is start or end point, and the wire connects to electrical device, the wire end offset will be set according to the given vertex. If the vertex is start or end point, and the wire connects to other wire, user can't set the vertex and exception will be thrown. If the vertex is start or end point, and the wire connects to nothing, the vertex will be set as the given vertex. | |
| ToString | Returns a string that represents the current object. (Inherited from Object ) | Object |