RVTDocs.com
Namespace: Autodesk.Revit.DB

BuiltInFailures.SketchFailures

Class
Description:
Failures about Sketch.
Inheritance Hierarchy:
System.Object
  Autodesk.Revit.DB.BuiltInFailures.SketchFailures
Syntax 
public static class SketchFailures
BuiltInFailuresSketchFailures Class Members:
Name Description
AreaLoadNoForce Area Load can't have all force components equal to zero.
AxisNotSpecified Axis of revolution not specified.
BadNosingProfile Stairs nosing profile must have one loop. Wrong profile will not be shown in profiles list in Stairs Type properties.
BadRailingsProfile Rail profile must have one closed loop. Wrong profile will not be shown in profiles list for rail definition.
BeamDirectionNotSpecified Beam direction not specified.
BeamDirectionNotSpecifiedError Beam direction not specified.
BentFabricSheetClosedLoopInSketch The bend profile cannot contain a closed loop. Click Continue to correct the profile or Click Quit sketching to exit the bend profile editor.
BentFabricSheetEmptySketch The bend profile requires at least one segment to be placed in a host. Click Continue to correct the profile or Click Quit sketching to exit the bend profile editor.
BentFabricSheetInvalidElementInSketch Arcs in a bend profile must be separated from one another with a connected straight segment. The bend profile cannot start or end with an arc. Click Continue to correct the profile or Click Quit sketching to exit the bend profile editor.
BentFabricSheetLinesOverlapOrIntersect Segments in a bend profile cannot overlap, intersect, or be collinearly contiguous. Click Continue to correct the profile or Click Quit sketching to exit the bend profile editor.
BentFabricSheetManyLoopsInSketch The bend profile cannot contain two or more disconnected segments. Click Continue to correct the profile or Click Quit sketching to exit the bend profile editor.
BentFabricSheetTooShortSegments A segment in the bend profile is too short to apply the wire bend diameter. The bent fabric sheet of the selected type cannot be placed in a host. Click Continue to correct the profile or Click Quit sketching to exit the bend profile editor.
BoundaryNoOverlap The split sketch is out of the boundary of split element sketch..
BuildingPadNoSurface A Pad can't extend beyond the edge of a Toposurface.
BuildingPadNoSurfaceError A Pad can't extend beyond the edge of a Toposurface.
CannotChangeUserSketchPlane Can't change plane of [Element Name] Sketch.
CannotChangeUserSketchPlaneError Can't change plane of [Element Name] Sketch.
CannotChangeWorkplaneVisibility Can't change Work Plane Visibility.
CannotComputeRailingsElevation Can't compute Railings Elevation Profile.
CannotComputeRailingsElevationError Can't compute Railings Elevation Profile.
CannotComputeRailingsElevationWarn Can't compute Railings Elevation Profile
CannotConvertSketch Can't convert Sketch to Rebar Shape.
CannotDrawExtrusionRoof Can't make extruded roof.
CannotDrawProfileRoof Can't make footprint roof.
CannotGetSketchReferences Cannot find references to dimension sketch.
CannotHaveArcs Sorry, we can't use arcs here.
CannotHaveArcsPath3d Sorry, we can't use arcs here.
CircleMultiPlanarShapeInSketch A circle can't be converted to multiplanar shape.
ClosedProfileRoof Extrusion roof sketch must be open. The roof's thickness and material composition are defined in its type.
ConstantHeightNotParallel Constant-height-defining lines must be parallel.
ConstantHeightNotParallelError Constant-height-defining lines must be parallel.
ContainedInOtherLoops When creating an opening, you cannot sketch loops within other loops. The highlighted loop(s) are contained within another loop.
ConvertSplineToLineFailed Failed to convert spline to straight line
CurveFromPickedFailed Can't create boundary from pick.
CurveIntersectsCutFace The highlighted line intersects the boundary of the face being modified. To modify a cut face, use open loops that end on the existing boundary without intersecting or overlapping existing edges.
CurveIntersectsSplitFace The highlighted line intersects the boundary of the face being split. To split a face at its border, use an open loop that ends on the boundary of the face.
CurveTooShort Line is too short.
DifferentOffsets Adjacent slope-defining lines must have identical eave heights; the highlighted lines do not. You can use the Align Eaves tool to have the eaves aligned for you.
ElementsSketchTooLarge The sketch defining the highlighted element is too large.
ElevationSketchNotAllowed Wall in a family can't have an elevation profile.
EndsNotOnCutFace Ends of the sketched loop do not lie on the boundary of the face being modified.
EndsNotOnEdge Ends of an open loop in sketch splitting face do not lie on an edge of the face to split.
FloorCannotAddDirectionCurve Cannot add the direction curve in the floor sketch.
FloorCannotAddDirectionCurveError Cannot add the direction curve in the floor sketch.
FloorDirectionNotSpecified Structural floor span direction not specified.
FloorManyDirectionCurves More than one span direction curve specified.
InvalidAreaLoadSketch Area Load has invalid Sketch.
InvalidCropAreaSketch Crop area sketch can either be empty or include one closed, not self-intersecting loop.
InvalidCropAreaSketchRegen Crop area sketch can either be empty or include one closed, not self-intersecting loop.
InvalidElevationSketch Elevation Profile sketch is invalid.
InvalidElevationSketchError Elevation Profile sketch is invalid.
InvalidProfile One or more profiles are invalid. Make sure that every used profile is a closed loop of non-intersecting lines.
InvalidProfileError One or more profiles are invalid. Make sure that every used profile is a closed loop of non-intersecting lines.
InvalidRoofCurveloop Base sketch for roof is invalid.
InvalidRoofCurveloopError Base sketch for roof is invalid
InvalidRoofCurveloopFailure Base sketch for roof is invalid
InvalidSketch Sketch is invalid.
InvalidSketchError Sketch is invalid.
InvalidSketchForBuildingpad Pad sketch is invalid.
InvalidSketchForCeiling Ceiling sketch is invalid.
InvalidSketchForFloor Floor sketch is invalid.
InvalidSketchForRoofsoffit Roof Soffit sketch is invalid.
InvalidSketchForToposolid Toposolid sketch is invalid.
InvalidSketchPath3d Sketch is invalid.
LandingNotEnoughBoundaryCurves Sketch landing require boundaries
LandingTwoManyLoops Sketch landing can only have one closed loop
LinesOverlap Cannot have overlapping lines.
LinesOverlapError Cannot have overlapping lines.
LinesOverlapPath3d Cannot have overlapping lines.
LoopIntersect Lines cannot intersect each other. The highlighted lines currently intersect.
LoopIntersectError Lines cannot intersect each other. The highlighted lines currently intersect.
LoopIntersectPath3d Lines cannot intersect each other. The highlighted lines currently intersect.
LoopsOutsideFaceSplit Some of the lines drawn lie outside of the boundary of the face being split. All lines used to split a face must be contained within the face being split and cannot intersect or overlap any of the boundaries of that face.
LoopsOutsideFaceSplitterTooShort Some of the lines drawn lie outside of the boundary of the face being split. All lines used to split a face must be contained within the face being split and cannot intersect or overlap any of the boundaries of that face.
ManyCCWLoops Area defined by sketch must be connected.
ManyCCWLoopsError Area defined by sketch must be connected.
ManyDirectionCurves More than one direction curve specified.
ManyDirectionCurvesError More than one direction curve specified.
MissingLapInSketch Rebar Sketch does not have lapped lengths. A circular shaped Rebar needs overlapping legths. Please overlap one of the ends of the circular Rebar Sketch.
MoreThanOneAxis More than one axes of revolution.
MutipleStairsPathInOneRunFailure Each stairs run can only have one stairs path.
NestedLoops Cannot have nested loops.
NoLoops Sketch is empty.
NoLoopsError Sketch is empty.
NoLoopsPath3d Sketch is empty.
NonMonotoneRoof All parts of an extruded roof must face upward. Make sure that no part of the sketch lies below any other part of the sketch.
NoPlane Highlighted geometry no longer determines a plane
NotOneCCWLoop This sketch defines more than one footprint. Make sure the sketch contains only one outermost loop and that there are no loops inside inner loops.
NotOneCurve More than one curve not allowed.
NotOneCurveError More than one curve not allowed.
NotOneCurvePath3d More than one curve not allowed.
NotOneLoop More than one loop not allowed.
NotOneLoopPath3d More than one loop not allowed.
OpenAreaLoadLoop Area Load Sketch can't contain open loops.
OpenLoop Lines must be in closed loops. The highlighted lines are open on one end.
OpenLoopError Lines must be in closed loops. The highlighted lines are open on one end.
OpenLoopPath3d Lines must be in closed loops. The highlighted lines are open on one end.
PathCannotBeClosedLoop Path cannot be a closed loop.
PathCannotBeClosedLoopPath3d Path cannot be a closed loop.
PathReinforcementClosedLoop Sketch contains a closed loop. Can't create Path Reinforcement.
PathReinforcementEmptySketch Sketch is empty. Can't create Path Reinforcement.
PathReinforcementManyLoops Sketch contains more than one chain. Can't create Path Reinforcement.
PlanarMultiPlanarShapeInSketch The current shape is only bent in a single plane. A multi-planar definition is not required. Please redefine the shape on the top plane only.
RailingDoublyConnected Railings hosted on Stairs must form a single, open, connected line.
RailingDoublyConnectedError Railings hosted on Stairs must form a single, open, connected line.
RailingNotConnected The Railing line must be a single connected Sketch. If you want separate pieces of Railing, create two or more separate Railings.
RailingNotConnectedError The Railing line must be a single connected Sketch. If you want separate pieces of Railing, create two or more separate Railings.
RebarEmptySketch Rebar Sketch is empty. Can't create Rebar.
RebarEmptySketchError Rebar Sketch is empty. Can't create Rebar.
RebarManyLoops Rebar Sketch contains more than one loop. Can't create Rebar.
RebarManyLoopsError Rebar Sketch contains more than one loop. Can't create Rebar.
RebarSystemDirectionNotSpecified Major direction not specified.
RebarSystemDirectionNotSpecifiedError Major direction not specified.
RunInvalidSketch Invalid sketch, can't create run by this sketch
RunNotEnoughBoundaryCurves Sketch run require boundaries (chains of one or more Boundary Lines)
SculptingCurvesCannotFormClosedLoop Curves cannot form a closed loop.
SculptingCurvesCrossAxis The highlighted curves cross the axis.
SculptingCurvesTouchAxis The highlighted curves touch the axis.
SculptingLoopsOnBothSidesOfAxis All curves must be on the same side of the axis.
SculptingSingleLineLoopLiesOnAxis The highlighted lines lie on the axis.
ShortCurveInSketch The sketch contains an extremely short line.
ShortCurveInSketchRoof The sketch contains an extremely short line.
SiteCannotDrawSurfaceBoundary Cannot make surface with specified boundary.
SketchedRunInvalidPath Invalid stair path. Stair path should connect both start and end riser, and cross all other risers.
SketchedShapeNotAvailable Skeched shape is not available for this type of element.
SketchFailurePlanes Sketch is no longer parallel to its defining plane
SketchingInTheWrongView Detail sketch is only editable in [View Type].
SketchingInWrongView Detail sketch is not editable in this view.
SketchOverconstrained Sketch is overconstrained.
SketchOverconstrainedError Sketch is overconstrained.
SketchOverconstrainedWarn Sketch is overconstrained.
SketchTooLarge Sketch is too large.
SketchWasDeleted Sketch was deleted.
StairClosedBoundaries Stairs Boundaries (chains of one or more Boundary Lines) should not form closed loops.
StairClosedBoundariesError Stairs Boundaries (chains of one or more Boundary Lines) should not form closed loops.
StairNotEnoughBoundaryCurves Stairs require boundaries (chains of one or more Boundary Lines) on each side of the Stair.
StairNotEnoughBoundaryCurvesError Stairs require boundaries (chains of one or more Boundary Lines) on each side of the Stair.
StairNotEnoughRiserCurves Boundaries (chains of one or more Boundary Lines) must be connected by at least two Riser Lines.
StairNotEnoughRiserCurvesError Boundaries (chains of one or more Boundary Lines) must be connected by at least two Riser Lines.
StairOnlyOneConnectedBoundary Stairs require no less than two boundaries (chains of one or more Boundary Lines)."
StairOnlyOneConnectedBoundaryError Stairs require no less than two boundaries (chains of one or more Boundary Lines).
StairRiserDoesntIntersectBoundary The line representing the top of a riser does not intersect one or both of the boundary lines.
StairRiserDoesntIntersectBoundaryError The line representing the top of a riser does not intersect one or both of the boundary lines.
StairTooManyConnectedBoundaries Stairs require no more than two boundaries (chains of one or more Boundary Lines).
StairTooManyConnectedBoundariesError Stairs require no more than two boundaries (chains of one or more Boundary Lines).
SubregionNoHostSurf A Subregion cannot be created outside the boundary of a Toposurface. A Subregion should be completely inside a Toposurface or overlap a Toposurface.
SuggestMakingFamilyNonParametric Performance Warning: This family now contains both labeled dimensions and sketches with many segments. This may hurt performance. To improve performance, create elements that require complex sketches as nested families.
SuspendedSketchWarn Highlighted element's sketch could not regenerate and has been suspended. Select the element and edit its sketch to fix the problem. The element will display in magenta until you fix the problem
TooFewParamsForSketch The sketched Structural Rebar element has too many segments to be properly parameterized. Please reduce the number of segments.
TooManyElementsInSketch This sketch is large. Performance will improve if constructed as several independent sketches.
TooManySlopes There is more than one slope defined.
TooManySlopesError There is more than one slope defined.
TrussClosedReference Truss references (chains of one or more reference lines) should not form closed loops."
TrussCrossingReferences Truss top and bottom references cannot cross.
TrussMissingReference Trusses require both a top and a bottom chord reference (chain of one or more reference lines).
TrussOverlappingReference Truss references (chains of one or more reference lines) cannot overlap themselves in the vertical direction.
TrussSegmentedReference Truss reference must form a continuous chain of one or more sketch lines.
TrussShiftedReferences Truss top and bottom references (chains of one or more reference lines) must overlap at least partially in the vertical direction.
TrussSwappedReferences Truss top reference must be above the bottom reference.
UnsatisfiedSupportAssocProp Constraint between a Line created with Pick Support and the Support is not satisfied.
UnsatisfiedWallAssocProp Constraint between a Line created with Pick Wall and the Wall is not satisfied.
VarSketchFailure Constraints defined by highlighted Lines and Dimensions can't be satisfied.
VarSketchInElementFailure The constraints of the sketch defining the highlighted element cannot be satisfied.
WrongCutBoundaryLoops Only open loops can be used for Edit Cut Profile. All open ends must lie on the boundary of the cut profile, and the loop may not touch the boundary anywhere except at its ends.
WrongFaceSplitterLoopTypesNum Sketch for splitting the face is invalid. Faces may be split either by a single closed loop that is contained within the face or by one or more open loops whose ends lie on the boundary of the face. None of the lines in the sketch are allowed to overlap or intersect the boundaries of the face.