Namespace: Autodesk.Revit.DB

BuiltInFailures.CurtainWallFailures

Class

Description:
Failures about CurtainWall.

Inheritance Hierarchy:
System.Object
Autodesk.Revit.DB.BuiltInFailures.CurtainWallFailures

Syntax

public static class CurtainWallFailures

Public NotInheritable Class CurtainWallFailures

public ref class CurtainWallFailures abstract sealed

[<AbstractClassAttribute>]
[<SealedAttribute>]
type CurtainWallFailures = class end

BuiltInFailuresCurtainWallFailures Class Members:

Name	Description
AdjustEndCurtainWallParameterNoCorners	Can't put Corner Mullion at end joined to non-Curtain Wall.
AllGridSegmentsRemoved	Curtain grid lines must have at least one segment.
CannotApplyGridSpecification	It is not possible to apply the host family's grid specification to this instance.
CannotDivideCurtainGrid	Can't divide Curtain Grid by Grid Line.
CannotGroupCurtainGridHost	Curtain grid based elements cannot be grouped.
CannotHaveIndependentOverlappingGrids	Overlapping independent type associated gridlines are not allowed.
CannotPlaceSplitMullions	Could not determine how to place the highlighted mullions after the wall was split.
CannotSplitOldMullions	Split does not work on curtain walls containing mullions created in Revit prior to version 4.0. You may delete the mullions, place them again, and then proceed with splitting the wall.
CannotSwitchToCurtainWall	Can't switch type to Curtain Wall after Edit Elevation Profile.
CannotUseCornerMullion	Corner Mullions must be placed at a location that can have neighboring Panels that are not tangent. With the exception of Wall Join locations, Corner Mullions are not currently supported on the external boundaries of Curtain elements.
CurtainGridFaceCannotBeReparamForGridRotation	Curtain grids cannot be rotated exactly as requested. Push "Adjust Grids" to get the nearest valid rotation.
CurtainGridOffHost	Curtain grid has left its host.
CurtainSystemHostInvisible	Element defining the Curtain System is invisible in the current view.
DanglingCurtainWallCorner	A Corner Mullion has been placed at the end of a Curtain Wall that is not joined to another Curtain Wall. The angle of the Corner Mullion will default to 90 degrees.
DeletingCurtainSystemFaceGridLines	Deleting Grid Lines residing on faces that no longer are part of a Curtain System.
DependentGridlineMayBeDeleted	Type generated gridlines will become non-associated due to changes in the type. Press delete if you wish to remove them instead.
ExceedMaxDrivenGridlines	Changes have been made that cause a curtain wall with type driven grid lines to exceed the maximum allowed number of type driven lines (200 in direction (1) and 200 in direction (2)). If you really need this many type driven grid lines, please split the affected wall before proceeding.
ExessiveBeltDistance	The requested Measurement Line Offset would place the put the Measurement Line of the face boundaries.
GridlinesOutOfBounds	Manually placed curtain grid lines are on the wall edges or outside the wall boundaries.
GridlinesOutOfBoundsWarn	Manually placed curtain grid lines are on the wall edges or outside the wall boundaries.
GridlinesOutsideWillBeRedependent	Type associated curtain grid lines outside of the edited wall boundaries will be made dependent again in order that they remain on the wall.
GridlinesOverlap	Overlapping gridlines should be avoided, unless there are only two and one is host type dependent and the other is not.
GridlinesWerePushed	Panels and mullions created by a curtain grid were created with slight inaccuracies.
GridOutOfOrder	Curtain wall grid lines have changed order.
GridOutOfOrderError	Curtain wall grid lines have changed order.
GridOutsideWall	Curtain wall grid lines are outside wall. If you are trying to shorten the wall, please remove grid lines, including mullions on top of them.
InvalidSkipSegments	A curtain grid line had invalid removed segment data. When correcting data, Revit may have split curtain panels that should be combined.
MullionLostRefReorder	Mullions have lost references as a result of gridlines changing order. These mullions must be deleted.
MullionsWillBeDeleted	The Mullions between the Panels being joined will be deleted.
MultipleDominatingMullions	Multiple dominating mullions on a grid face may cause ambiguous automatic adjustment of margins.
MultipleIdsInCurtainSystem	A Curtain System cannot be based on faces from multiple elements.
MustReplacePanels	Missing Curtain Panels will be replaced with System Panels to complete command.
NegativeBeltDistance	Measurement Line Offset cannot be negative.
NonSupportedCurtainWall	Currently, only straight Walls with straight or arc edges are supported for non-rectangular Curtain Walls.
NoPanelsLoaded	No Curtain Panel Families loaded. Can't make arced Curtain Wall.
RequestOrphanMullionDeletion	Due to the changes in parameters of their hosts some mullions became non-type driven.
RuledCurtainElementLostCurves	Ruled Curtain System cannot be built. The Lines or Edges used to create it cannot be found.
TypePanelsFronNonRectCellsUnlocked	Loaded family curtain panels cannot be used in non-rectangular cells of the curtain host. Type-driven panels from non-rectangular cells were unlocked and left unchanged.