Namespace: Autodesk.Revit.DB

TessellatedShapeBuilder

Class

Description:
A class that permits structured building of geometry or a mesh from a collection of connected faces. Contains all closed face sets and custom precisions.

Remarks:
Creates a geometry populated with faces defined by TessellatedFace objects stored in the input connected face sets. The faces defined by each connected face set may form an open shell or the boundary of a solid 3D region. All faces are planar and have polyline boundaries, defined as sequences of 3d coordinates. Faces are added to the builder as a part of connected face sets, representing faces which share edges. Order of faces in the sets is irrelevant. Faces can only be added to the builder when a face set has been opened and is available to take in faces (use OpenConnectedFaceSet(Boolean) to open a new face set). Before attempting to build Revit geometry from the builder the current face set should be closed (CloseConnectedFaceSet()). The builder allows for the possibility of multiple face sets. The builder will try to create a geometry valid in Revit despite inconsistencies or omissions in the input data.

For each connected face set, it will check the face orientations and change them wherever needed so that the orientations of the faces in that set are consistent.
If a connected face set is closed, it will check if the face normals point outward. If not, it will reverse the orientations of all faces. That means, each closed connected face set will represent a solid.

Limitations in the current implementation:

It does not support the definition of a "void", even if the user had set the orientations of the faces to define a "void".
If there is more than one connected face set, it does not check if they intersect or overlap each other.

Inheritance Hierarchy:
System.Object
Autodesk.Revit.DB.ShapeBuilder
Autodesk.Revit.DB.TessellatedShapeBuilder

Syntax

public class TessellatedShapeBuilder : ShapeBuilder

Public Class TessellatedShapeBuilder
	Inherits ShapeBuilder

public ref class TessellatedShapeBuilder : public ShapeBuilder

type TessellatedShapeBuilder = 
    class
        inherit ShapeBuilder
    end

Examples

// Create a pyramid-shaped DirectShape using given material for the faces
public void CreateTessellatedShape(Document doc, ElementId materialId)
{
    List<XYZ> loopVertices = new List<XYZ>(4);

    TessellatedShapeBuilder builder = new TessellatedShapeBuilder();

    builder.OpenConnectedFaceSet(true);
    // create a pyramid with a square base 4' x 4' and 5' high
    double length = 4.0;
    double height = 5.0;

    XYZ basePt1 = XYZ.Zero;
    XYZ basePt2 = new XYZ(length, 0, 0);
    XYZ basePt3 = new XYZ(length, length, 0);
    XYZ basePt4 = new XYZ(0, length, 0);
    XYZ apex = new XYZ(length / 2, length / 2, height);

    loopVertices.Add(basePt1);
    loopVertices.Add(basePt2);
    loopVertices.Add(basePt3);
    loopVertices.Add(basePt4);
    builder.AddFace(new TessellatedFace(loopVertices, materialId));

    loopVertices.Clear();
    loopVertices.Add(basePt1);
    loopVertices.Add(apex);
    loopVertices.Add(basePt2);
    builder.AddFace(new TessellatedFace(loopVertices, materialId));

    loopVertices.Clear();
    loopVertices.Add(basePt2);
    loopVertices.Add(apex);
    loopVertices.Add(basePt3);
    builder.AddFace(new TessellatedFace(loopVertices, materialId));

    loopVertices.Clear();
    loopVertices.Add(basePt3);
    loopVertices.Add(apex);
    loopVertices.Add(basePt4);
    builder.AddFace(new TessellatedFace(loopVertices, materialId));

    loopVertices.Clear();
    loopVertices.Add(basePt4);
    loopVertices.Add(apex);
    loopVertices.Add(basePt1);
    builder.AddFace(new TessellatedFace(loopVertices, materialId));

    builder.CloseConnectedFaceSet();
    builder.Target = TessellatedShapeBuilderTarget.Solid;
    builder.Fallback = TessellatedShapeBuilderFallback.Abort;
    builder.Build();

    TessellatedShapeBuilderResult result = builder.GetBuildResult();

    using (Transaction t = new Transaction(doc, "Create tessellated direct shape"))
    {
        t.Start();

        DirectShape ds = DirectShape.CreateElement(doc, new ElementId(BuiltInCategory.OST_GenericModel));
       ds.ApplicationId = "Application id";
       ds.ApplicationDataId = "Geometry object id";

        ds.SetShape(result.GetGeometricalObjects());
        t.Commit();
    }
}

' Create a pyramid-shaped DirectShape using given material for the faces
Public Sub CreateTessellatedShape(doc As Document, materialId As ElementId)
    Dim loopVertices As New List(Of XYZ)(4)

    Dim builder As New TessellatedShapeBuilder()

    builder.OpenConnectedFaceSet(True)
    ' create a pyramid with a square base 4' x 4' and 5' high
    Dim length As Double = 4.0
    Dim height As Double = 5.0

    Dim basePt1 As XYZ = XYZ.Zero
    Dim basePt2 As New XYZ(length, 0, 0)
    Dim basePt3 As New XYZ(length, length, 0)
    Dim basePt4 As New XYZ(0, length, 0)
    Dim apex As New XYZ(length / 2, length / 2, height)

    loopVertices.Add(basePt1)
    loopVertices.Add(basePt2)
    loopVertices.Add(basePt3)
    loopVertices.Add(basePt4)
    builder.AddFace(New TessellatedFace(loopVertices, materialId))

    loopVertices.Clear()
    loopVertices.Add(basePt1)
    loopVertices.Add(apex)
    loopVertices.Add(basePt2)
    builder.AddFace(New TessellatedFace(loopVertices, materialId))

    loopVertices.Clear()
    loopVertices.Add(basePt2)
    loopVertices.Add(apex)
    loopVertices.Add(basePt3)
    builder.AddFace(New TessellatedFace(loopVertices, materialId))

    loopVertices.Clear()
    loopVertices.Add(basePt3)
    loopVertices.Add(apex)
    loopVertices.Add(basePt4)
    builder.AddFace(New TessellatedFace(loopVertices, materialId))

    loopVertices.Clear()
    loopVertices.Add(basePt4)
    loopVertices.Add(apex)
    loopVertices.Add(basePt1)
    builder.AddFace(New TessellatedFace(loopVertices, materialId))

    builder.CloseConnectedFaceSet()
    builder.Target = TessellatedShapeBuilderTarget.Solid
    builder.Fallback = TessellatedShapeBuilderFallback.Abort
    builder.Build()

    Dim result As TessellatedShapeBuilderResult = builder.GetBuildResult()

    Using t As New Transaction(doc, "Create tessellated direct shape")
        t.Start()

        Dim ds As DirectShape = DirectShape.CreateElement(doc, New ElementId(BuiltInCategory.OST_GenericModel))
        ds.ApplicationId = "Application id"
        ds.ApplicationDataId = "Geometry object id"

        ds.SetShape(result.GetGeometricalObjects())
        t.Commit()
    End Using
End Sub

TessellatedShapeBuilder Class Members:

Name	Description	Inherited From
TessellatedShapeBuilder	Constructs a new instance of a TessellatedShapeBuilder.

Name	Description	Inherited From
Fallback	Defines acceptable fallback if the desired type of geometry can't be built.
GraphicsStyleId	Optional - if set, the built geometry will use that graphics style.
IsFaceSetOpen	Flag whether the current set of connected faces is open and additional tessellation faces can be added to it.
IsValidObject	Specifies whether the .NET object represents a valid Revit entity. (Inherited from ShapeBuilder )	ShapeBuilder
LogInteger	Integer value used for logging, if it is performed. Usually the number of the face set(s) in the IFC file, from which they are imported. Any value is acceptable.
LogString	String used for logging, if any. Usually the name of the file from which face sets were imported.
NumberOfCompletedFaceSets	Number of completed face sets.
OwnerInfo	String used for logging, if any. Usually describes the element or object, which either defined or will own the geoemtrical objects to be built.
Target	Requests the type of geometry to be built.

Name	Description	Inherited From
AddFace	Adds a face to the currently open connected face set.
AreTargetAndFallbackCompatible	Checks whether this combination of fallback and target parameters can be used as a valid combination of inputs.
Build	Builds the designated geometrical objects from the stored face sets. Stores the result in this TessellatedShapeBuilder object.
CancelConnectedFaceSet	Cancels the current face set - i.e., all data from it will be lost and the builder will have no open connected face set anymore.
Clear	Erases all face set and clears the logs, if any.
CloseConnectedFaceSet	Closes the currently open connected face set.
CreateMeshByExtrusion	Builds a mesh by extruding curve loop(s) along extrusion distance.
Dispose	(Inherited from ShapeBuilder )	ShapeBuilder
DoesFaceHaveEnoughLoopsAndVertices	Checks whether 'face' has enough loops and vertcies to be valid.
Equals	Determines whether the specified object is equal to the current object. (Inherited from Object )	Object
GetBuildResult	Get the built geometry, build status and other data stored in TessellatedShapeBuilderResult. Clears the stored data.
GetHashCode	Serves as the default hash function. (Inherited from Object )	Object
GetType	Gets the Type of the current instance. (Inherited from Object )	Object
OpenConnectedFaceSet	Opens a new connected face set.
ToString	Returns a string that represents the current object. (Inherited from Object )	Object