Namespace: Autodesk.Revit.DB

BuiltInFailures.ConnectorFailures

Class

Description:
Failures about Connector.

Inheritance Hierarchy:
System.Object
Autodesk.Revit.DB.BuiltInFailures.ConnectorFailures

Syntax

public static class ConnectorFailures

Public NotInheritable Class ConnectorFailures

public ref class ConnectorFailures abstract sealed

[<AbstractClassAttribute>]
[<SealedAttribute>]
type ConnectorFailures = class end

BuiltInFailuresConnectorFailures Class Members:

Name	Description
AirTerminalCenterNotAligned	The center of the Air Terminal doesn't align at (0,0,0): align the Air Terminal Center to the Origin Defining Reference Planes could help to solve the problem.
AllElementsRemovedFromCircuitGroup	[System] is empty and will be deleted.
DisconnectedElements	Elements are disconnected!
ElementAssignedToDefaultSystem	At least one connector on the highlighted element is currently assigned to the [Element Name]. In general items shouldn't be assigned to the Default Systems, but should be assigned as equipments or elements of a non-default system. Click the More Info button below for additional information on System Creation.
ElementHasMultipleConnectors	Revit found one or more elements with multiple connectors. Select each element and then select the connectors to use for the analytical connection.
ElementsAreDisconnected	Elements need to be disconnected.
ElementsConnectedToParent	You have selected elements that are connected to a parent object in a System. These elements cannot be removed from the System.
ElementsNeedToBeDisconnected	Elements need to be disconnected.
ExistsForSelectedElement	Connections already exists for selected element.
FittingMustBeOnDuct	The [Tap] must be attached to duct.
FittingMustBeOnDuctWarn	The [Tap] must be attached to duct.
FittingMustBeOnPipe	The [Tap] must be attached to pipe.
FittingMustBeOnPipeWarn	The [Tap] must be attached to pipe.
InvalidConnectionRef	The selected fitting has invalid connections and must be deleted to continue.
InvalidConnector	The connector is invalid, the size cannot be determined from the connector.
InvalidLoadClassificationValue	The load classification parameter cannot be empty. Please select a valid load classification element for the connector parameter and the associated family parameter.
InvalidPowerFactorValue	The value for Power Factor must be between 0 and 1.
JointGenderMismatch	The element has a connector with a fitting joint gender mismatch
JointShapeMismatch	The element has a connector with a fitting joint shape mismatch
JointSizeMismatch	The element has a connector with a fitting joint size mismatch
JointTypeMismatch	The element has a connector with a fitting joint type mismatch
LayoutConnector	[Unassigned System Type] on Connector [Index Number].
MismatchNoAvailableConnector	Cannot add [Element] to System. There is no available connector matching the System Type ([Type Name]) for the System.
MultipleNetwork	Elements in [System Name] are not connected in a single physical network due to one or both of the following:\n- There are disconnects in the system's physical network.\n- Elements in the system are connected to more than one physical network.
NetworkValidityError	The family is connected in a network and can no longer keep the connectivity. Disconnect the family from the network?
NetworkValidityErrorWasDisconnected	The family is connected in a network and can no longer keep the connectivity. Disconnect the family from the network?
NoLossDefined	No Loss Defined
NoSupportKCoefficientTable	"K Coefficient from table" is not supported on connector for the element
NotAllowedToModifyGroupElementsError	Connection to a group failed. Modification of elements within a group is not allowed.
NotAllowedToModifyGroupElementsWarning	Connection to a group failed. Modification of elements within a group is not allowed.
OpenConnector	The element has an open connector
RbsNetworkValidityError	The family is connected in a network and can no longer keep the connectivity.
RemoveConnectorLinksWarn	The links between connector [Index] and connector [Index], connector [Index] and connector [Index] are removed.
RemoveConnectorLinkWarn	The link between connector [Index] and connector [Index] is removed.
ShapesNotMatch	Shapes do not match. A connection could not be made.
SizingCalculationFlowOnlyWarn	Some elements are not sized because the system calculation is flow only. You may change the system calculation level to size them again.
SizingCalculationNoneWarn	Some elements are not sized because the system calculation level is none or performance. You may change the system calculation level to size them again.
SizingFailed	Sizing failed.
UnconnectedCircuit	The element has an unconnected circuit on its connector
UnconnectedDevice	Device has an unconnected [Type Name] connector (index = [Index Number]).
UndefinedConnector	Revit does not support Undefined connectors. The following have been replaced by the default connector: [Connector Element]