RVTDocs.com
Namespace: Autodesk.Revit.DB

BuiltInFailures.ElectricalFailures

Class
Description:
Failures about Electricity.
Inheritance Hierarchy:
System.Object
  Autodesk.Revit.DB.BuiltInFailures.ElectricalFailures
Syntax 
public static class ElectricalFailures
BuiltInFailuresElectricalFailures Class Members:
Name Description
AllSlotsOnPanelOccupied All slots on panel: [Panel Name] are occupied. Some circuits will be disconnected from this panel.
BankDistanceSmallerThanDiameter The distance value is smaller than the conduit diameter, please enter a larger value
CableTrayModified The cable tray has been modified to be in the opposite direction or insufficient space to create the required fittings.
CannotAddMorePolesToCircuit Empty slots are unavailable to hold the number of poles you specified for this spare. \nTo add more poles to this spare, you must free up slots by moving the circuits below the spare.
CannotAssignSecondaryDistSysToCircuit Cannot assign or add [Element] to Circuit. There is no assigned secondary distribution system for [Element].
CannotConnectDifferentDesignOptsObjects Cannot add or assign [Element] to circuit. Electrical objects belonging to different design options cannot be connected.
CannotCreatePanelScheduleDuetoNoDefaultTemplate A panel schedule cannot be created for these panels. A default panel schedule template must be assigned for this template type.
CannotRemoveMembersInCircuitHavingParent You have selected elements that are connected to a Panel object in a Circuit. These elements cannot be removed from the Circuit.
CircuitOverload Total connected apparent power for Circuit [Name] is exceeding 80% of the defined rating ([Rating Value]).
CircuitsOverlapAndDeleteSpareSpace More than one Spare/Space falls onto the same slot. These Spares/Spaces will be deleted.
CircuitsOverlapDisconnectCircuits More than one circuit falls onto the same slot. These circuits will be disconnected.
ConduitModified The conduit has been modified to be in the opposite direction or insufficient space to create the required fittings.
ElementsBelongToOtherCircuit You have selected elements that are already part of other Circuits that have assigned Panels. The elements you selected cannot be added to this Circuit.
FamilyMismatchCircuit The family no longer matches the properties for the Circuit. Disconnect the family from the Circuit?
FeedThroughLugsIsDisabled The feed through lugs option is unchecked.
FeedThroughLugsIsNotEnabledAndBindFormulaInFamily Can't change connection type to Feed Through Lugs because Feed Through Lugs is unchecked. Enable Feed Through Lugs with related formula in family editor the Feed Through Lugs is mapped to. Select the panel -> Edit Family -> Family Types.
FeedThroughLugsIsNotEnabledAndBindGlobalParam Can't change connection type to Feed Through Lugs because Feed Through Lugs is not enabled. Enable Feed Through Lugs by enabling the global parameter that Feed Through Lugs is mapping. Click Manage tab -> Settings panel -> Global Parameters.
FeedThroughLugsIsOccupied The feed through lugs is in use by circuit [Element].
FeedThroughLugsIsOccupiedAndDisconnectOtherCircuits The feed through lugs is occupied, so other circuits connected with feed through lugs will be disconnected from this panel [Panel Name].
InvalidApparentPowerDensity The Apparent Power Density is invalid. Edit the Power Density and/or Power Factor to recalculate the Apparent Power Density.
InvalidNumberOfCircuitValueForDataPanel The number of circuits on the data panel currently exceeds the value you entered for Maximum Amount of Circuits parameter. Reduce the number of circuits on the equipment before changing this value.
InvalidNumberOfCircuitValueForSwitchPanel The number of circuits on the switchboard currently exceeds the value you entered. Reduce the number of circuits on the equipment before changing this value.
InvalidNumwiresSinglephase Invalid number of wires for single phase, only 2 and 3 are valid.
InvalidPathOfParallelConduits Invalid path of parallel conduits
MaximumNumberOfPolesExceeded You cannot add more poles to this spare, as doing so would exceed the maximum number of poles set for this equipment.
MismatchConnectorDistSysToCircuit Cannot add [Element] to Circuit. The Type for the available connector does not match the Type ([Name]) for the Circuit.
MismatchDistributionSystem [Name1] and [Name2] cannot connect with each other due to mismatched voltage or number of phases.
MismatchNmbAssignedDistSysToCircuit Cannot assign or add [Element] to Circuit. There is no assigned distribution system for [Element].
MismatchNmbOfPolesToCircuit Cannot add [Element] to Circuit. The Number of Poles for [Element] does not match the Number of Poles ([Name]) for the Circuit.
MismatchPoleBrakesSlotsNumbers The number of pole breakers may not be less than the number of occupied slots.
MismatchVoltageLineToLine Cannot assign or add [Element] to Circuit. The Voltage ([Voltage Value]) for the Circuit is out of range for the Line to Line Voltage for [Element] (The Line to Line Voltage is specified in the assigned Distribution System).
MismatchVoltageToCircuit Cannot add [Element] to Circuit. The Voltage for [Element] is out of range for the Voltage ([Voltage Value]) for the Circuit.
MissingOrInvalidWireSizeTable Wire Size Table "[Fail Name]" is missing or invalid. Use Electrical Settings to select a valid Wire Size Table.
NoAvailableMatchingConnector Cannot add [Element] to Circuit. There is no available connector matching the Type ([Type Name]) for the Circuit.
NoDistributionSystem The distribution system of [CategoryName] [Name] is set to None. Assign a distribution system.
NotAllowedCableTrayConduitRotation Don't allow to rotate a horizontal cable tray/conduit like this
NotEnoughAvailSlotsAndLugsOnPanel You can't connect to panel [Panel Name] because there aren't enough slots and Feed Through Lugs is occupied. \nYou can increase the [ParameterName] to be greater than [Number] to connect through breaker slots or you can disconnect existing Feed Through Lugs connection.
NotEnoughAvailSlotsAndLugsOnSwitchPanel You can't connect to switchboard [Panel Name] because there aren't enough space and circuit [Circuit Name] is set to Feed Through Lugs. \nYou can increase the number of circuits to be greater than [Number] to connect through breakers or you can disconnect circuit and select Feed Through Lugs again.
NotEnoughAvailSlotsOnDataPanel You can't connect to data panel [Panel Name] because there isn't enough space \nYou can increase the number of circuits to be greater than [Number].
NotEnoughAvailSlotsOnPanel You can't change the connection type to Breakers connect to panel [Panel Name] because there aren't enough slots. \nYou can increase the [ParameterName] to be greater than [Number] to connect through breaker slots or open the panel schedule and manually reshuffle non - consecutive slots.
NotEnoughRoomForParallelConduits Due to changes in elevation, there is not enough room to generate all of the parallel conduits. As a result, some conduit segments have not been generated.
NotEnoughRoomForParallelPipes Due to changes in elevation, there is not enough room to generate all of the parallel pipes. As a result, some pipe segments have not been generated.
NotEnoughSlotsOnlyLugAvailable There aren't enough slots on panel [Panel Name], so the circuit will connect through Feed Through Lugs.
NotEnoughSlotsOnlyLugAvailableForSwitchPanel There aren't enough space on switchboard [Panel Name], so the circuit will connect through Feed Through Lugs.
NotPositiveBendRadius The value you entered for the bend radius is zero or a negative value. Enter a positive value.
NotSupportConcentricBend Conduit with Fittings do not support Concentric Bend Radius, the bend radius of the conduit fittings will be same.
NumberOfCircuitFullOnSwitchPanel You can't change the connection type to Breakers and connect to switchboard [Panel Name] because there aren't enough space. \nYou can increase the number of circuits to be greater than [Number] to connect through breakers.
ObjsDemolished Cannot assign [Element] to circuit. Objects that are demolished cannot be added to a circuit.
PanelMismatchCircuitType Cannot assign [Element] to Circuit. The Type for the panel does not match the Type ([Name]) for the Circuit.
PanelMismatchDistSysWhenCircuitAssigned The selected circuit was added to panel [Element], but the distribution system for the panel does not match the power connector definition on the panel.
PrimaryNumOfPhasesNotEqualWithSecondary Number of Phases of the primary distribution system isn't equal with the secondary distribution system's
ReplaceSpareSpaceOnPanelBoard Need to replace spare or space on panelboard.
ReplaceSpareSpaceOnSwitchBoard Need to replace spare or space on switchboard.
SecondaryNumOfPhasesNotEqualWithPrimary Number of Phases of the secondary distribution system isn't equal with the primary distribution system's
SelectedElementsArePartOfOtherCircuit You have selected elements that are already part of other Circuits. They will be removed from the original Circuits and added to this one.
SmallBendRadius The value you entered for the bend radius for conduit is too small. Enter a larger value.
TransformerNoDistributionSystem At least one of the distribution systems of Electrical Analytical Transformer [Name] is set to None. Assign distribution systems to the transformer.
UnsignedCircuit Circuit is not assigned to a panel
UnsupportedTransformerPrimaryDS [Distribution System Name] cannot appear on the primary side of the transformer.
VoltageIsOutOfRange Cannot assign or add [Element] to Circuit. The Voltage ([Voltage Value]) for the Circuit is out of range for the Line to Ground Voltage for [Element] (The Line to Ground Voltage is specified in the assigned Distribution System)."
WireMaxSizeNonexistent Cannot find max size in current wire type's material table.