Namespace: Autodesk.Revit.DB

BuiltInFailures.AnalyticalModelFailures

Class

Description:
Failures about AnalyticalModel.

Inheritance Hierarchy:
System.Object
Autodesk.Revit.DB.BuiltInFailures.AnalyticalModelFailures

Syntax

public static class AnalyticalModelFailures

Public NotInheritable Class AnalyticalModelFailures

public ref class AnalyticalModelFailures abstract sealed

[<AbstractClassAttribute>]
[<SealedAttribute>]
type AnalyticalModelFailures = class end

BuiltInFailuresAnalyticalModelFailures Class Members:

Name	Description
AdjustCurveTooShort	AdjustCurve is too short.
AdjustEdgeTooShort	AdjustEdge is too short.
AdjustEdgeTooShortErr	AdjustEdge is too short - continuable error version.
AdjustEdgeTooShortWarn	AdjustEdge is too short.
AnalyticalBeamSlabWarning	Beam and Slab Analytical Models do not have the same Analytical Projection Plane.
AnalyticalCurvedPanelNotValid	Analytical Curved Panel is not valid.
AnalyticalDiscrepancyWarning	Distance between Analytical and Physical Models of Structural Element is beyond tolerance of [Value]
AnalyticalElementsInvalidAfterUpgrade	One or several analytical elements have become invalid during the upgrade process and will be deleted.
AnalyticalGapWarning	Detected physical connection between Structural Elements, but did not detect Analytical intersection.
AnalyticalLinkJoinedNodes	Analitycal Link is invalid. Reference nodes have been joined.
AnalyticalLinkNotConnected	Analytical Link has lost one or more references.
AnalyticalMemberInstability	Possible Member Instability, based on Release Conditions
AnalyticalModelInstability	Possible Model Instability
AnalyticalModelIsIncorrect	Analytical Model is not created for the structural element.
AnalyticalPanelNotPlanar	Analytical Panel is not planar.
AnalyticalPanelNotVisible	Analytical Panel is not visible in the current view.
AnalyticalPhysicalCheckDone	Analytical / Physical Model Consistency check is complete.
AnalyticalSupportCycleWarning	Circular support chain detected
AnalyticalSurfaceCannotMove	Cannot move analytical surface.
AnalyticalSurfaceCannotMoveByConnector	Cannot move analytical surface because it will disconnect the analytical nodes.
AnalyticalTopBottomPlanesReversed	Analytical Top Projection Plane is partially or completely below Analytical Bottom Projection Plane. Please reset top and/or bottom planes to valid values.
AutoDetectIgnoreLeaderWarning	Analytical Model for Structural Element has reset to its default location.
BoundaryLinesIntersect	Boundary lines intersect.
CannotCreateAnalyticalGeometry	Cannot construct Analytical Geometry.
CannotKeepAnalyticalAdjustment	Analytical model Adjustment distance exceeds current Adjustment Snapping Distance. To adjust snap settings, go to the Structural Settings Dialog.
CannotMakeAnalyticalGeometry	Cannot construct Analytical Geometry.
CannotSlantAnalyticalWallError	Cannot slant a wall with an Analytical Model. Please disable the Analytical Model first.
ContextualAnalyticalModelModeNotEnabled	Contextual Analytical Model not enabled. File open was canceled.
HighestAssociatedLevelBelowLowestAssociatedLevel	The Highest Associated Level is set below the Lowest Associated Level
LoadsMayBeNotUpToDate	Reactions defined as Internal Load (Is Reaction) may no longer be valid since the analytical model has changed.
LowestAssociatedLevelAboveHighestAssociatedLevel	The Lowest Associated Level is set above the Highest Associated Level
ProjectionPlaneInvalidWall	Projection plane becomes invalid for this wall.
ProjectionPlanesNotIntersect	Can't project Analytical Model. Planes do not intersect each other.
ProjectionPlanesParallel	Can't project Analytical Model. Two or more projection planes are parallel.
StructAnalyticalErrorProjection	Can't project Analytical Model to Analytical Projection Surface
StructuralElementMayNotBeSupported	Structural Element may not be supported -- verify support for Element.
StructWallAnalyticalErrorAlign	Can't align Analytical Model with joined Walls.
StructWallAnalyticalErrorConversion	Can't convert Edges to Analytical Model curves.
SupportCheckDone	Member support check is complete. No unsupported elements detected.
UnableToUpgradeAnalyticalElementGeometry	Unable to upgrade analytical element with incorrect geometry. To keep the elements, open Revit 2022 and correct the elements.
WallAMLostAdjustmentReference	Wall Analytical Model has lost its adjustment reference.